: If the game fails to launch, install the latest DirectX End-User Runtimes and Visual C++ Redistributable .
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | Unit powers off above 5,500 RPM | Voltage drop due to thin power wire | Upgrade to 16 AWG supply wire directly from fusebox | | Extreme lean spike on tip-in | TPS slew rate too high for Redspike ADC | Lower the "Transient Throttle Gain" in TuneStudio to 0.85 | | Car goes into limp mode after 10 minutes | CAN bus conflict with OEM stability control | Set "CAN Filter Mode" to "Passive Listen" in advanced settings | | Bluetooth disconnects when headlights are on | Ground loop interference | Install a 10mm ferrite bead on the Redspike power lead |
: If the game fails to launch, install the latest DirectX End-User Runtimes and Visual C++ Redistributable .
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | Unit powers off above 5,500 RPM | Voltage drop due to thin power wire | Upgrade to 16 AWG supply wire directly from fusebox | | Extreme lean spike on tip-in | TPS slew rate too high for Redspike ADC | Lower the "Transient Throttle Gain" in TuneStudio to 0.85 | | Car goes into limp mode after 10 minutes | CAN bus conflict with OEM stability control | Set "CAN Filter Mode" to "Passive Listen" in advanced settings | | Bluetooth disconnects when headlights are on | Ground loop interference | Install a 10mm ferrite bead on the Redspike power lead |
