: Irritating to eyes and skin; repeated exposure may cause dryness or cracking .
: Hard-wearing, lead-free, and quick-drying under normal temperatures. Hazard Identification nasca spray paint msds install
| Problem | Most Likely Cause | Solution (From MSDS/Install Logic) | | :--- | :--- | :--- | | | Silicone contamination on substrate | Wipe with MSDS-recommended silicone remover (e.g., n-Heptane). Sand back to base. | | Orange peel | Spraying too far OR surface too hot | Reduce distance to 6 inches. Wait for cooler ambient temp (<80°F). | | Clouding/blushing | High humidity (>70%) | Apply 5% retarder thinner (butylene glycol) or move work indoors with dehumidifier. MSDS warns water incompatibility. | | Nozzle clogging | Paint dried in tip after 30+ sec idle | Remove nozzle, soak in acetone (MSDS ingredient), poke clean with a wire. Never use compressed air backward. | | Lifting (wrinkling) | Second coat applied outside recoat window | Wait 48 hours, sand down to stable layer, and repaint. Cannot be fixed wet. | : Irritating to eyes and skin; repeated exposure