Satlink Ws6979 Software Upgrade Free __full__

Here’s a professional write-up for upgrading the Satlink WS-6979 meter software for free.

Satlink WS-6979 Software Upgrade Guide (Free Method) The Satlink WS-6979 is a popular digital satellite finder/meter used by technicians and enthusiasts for aligning dishes, checking signal quality, and analyzing DVB-S/S2 signals. Like many modern meters, keeping its software (firmware) up to date ensures bug fixes, new satellite data, improved blind scan speeds, and better overall stability. Below is a step-by-step free upgrade method using a USB flash drive and the official Satlink firmware.

⚠️ Important Precautions

Use the correct firmware version – Download the version specifically for the WS-6979 (not WS-6906, WS-6987, etc.). Keep the meter powered – Do not turn off the device during the upgrade. Use fully charged batteries or connect to external power. Backup your data – User-stored satellite lists and transponders may be overwritten. Save them if the tool supports export. Verify USB format – USB drive must be FAT32 format. satlink ws6979 software upgrade free

What You’ll Need

Satlink WS-6979 meter USB flash drive (2GB to 16GB, FAT32 formatted) Computer with internet access USB cable (optional for some versions)

Free Upgrade Steps 1. Download the Correct Firmware Visit the official Satlink support page or a trusted satellite forum (e.g., Satellites.co.uk , Freesat.cn ). Look for: Here’s a professional write-up for upgrading the Satlink

Model: WS-6979 File type: .bin or .fw Version example: WS6979_V2.5_202308.bin

⚠️ Avoid unofficial “unlocked” firmware from unknown sources – these can brick your device.

2. Prepare the USB Drive

Format USB drive to FAT32 . Create a folder named SATLINK (all caps) in the root of the USB. Copy the firmware file ( .bin ) into the SATLINK folder. (Optional) Some versions require renaming the file to WS6979.bin – check the release notes.

3. Upgrade the WS-6979